| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Brand: | C&J |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is dual power automatic transfer switch?
1.Dual-power automatic transfer switch is microprocessor, which is used to start and switch between grid power and grid power or between grid power and generator power supply in power grid system. It can supply power continuously. Series of dual power supply, when the common use of sudden failure or power outage, through the dual power automatic transfer switch, automatically put into the standby power supply (under small load standby power supply can also be supplied by generators), so that the equipment can still operate normally. The most common are elevators, fire protection, monitoring, lighting and so on.When the generator set is used as emergency lighting power supply, the start-up time and power conversion time of the generator should not exceed 15s. Double power automatic switching switch should choose "city power - generator conversion" special type.
2.Dual-power automatic transfer switch has the functions of short circuit and overload protection, over-voltage, under-voltage, phase-gap automatic conversion and intelligent alarm, automatic conversion parameters can be set freely outside, and intelligent protection of operating motor. When the fire control center gives a control signal to the intelligent controller, two circuit breakers enter the sub-unit. In the gate state, the computer network interface is reserved for the realization of remote control, remote adjustment, remote communication, remote measurement and other four remote functions.
Application
1.CJQ1-63 dual power supply automatic transfer switching appliance is suitable for dual power supply systems with AC 50Hz, rated working voltage 400V, and rated working current below 63A. Selective switching between the two power supplies is possible as required.
2.The product has the functions of overload and short circuit, and also has the function of outputting closing signal.Especially suitable for lighting lines in office buildings, shopping malls,banks,high-rise buildings, etc.
3.The product complies with lEC60947-6-1 and GB/T14048.11 standards
Features
1.Strong anti-interference ability and high precision;
2.Complete protection functions, with overload and short circuit protection;
3.Small size, high breaking, short arcing, compact structure, beautiful аppearance;
4.Noiseless operation, energy saving and consumption reduction, easy installation and operation, and stable performance.
Normal working conditions
1.Ambient air temperature: the upper limit does not exceed +40°C,the lower limit does not exceed -5°C, and the average value of 24 hours does not exceed +35°C;
2.Installation site: the altitude does not exceed 2000m;
3.Atmospheric conditions: The relative humidity of the atmosphere does not exceed 50% when the surrounding air temperature is +40°C. At a lower temperature, there can be a higher temperature. When the average minimum temperature of the wettest month is +25°C, the average maximum relative humidity is 90%, And taking into account the condensation that occurs on the surface of the product due to humidity changes,special measures should be taken;
4.Pollution level: lll level;
5.Installation environment: no strong vibration and shock at the operating site, no corrosion and harmful gases that damage insulation, no serious dust, no conductive particles and explosive hazardous substances, no strong electromagnetic interference;
6.Use category: AC-33iB
| Product number | Dimensions (mm) | Installation size (mm) | ||||
| L | W | H | L1 | W1 | Hole | |
| CJQ1-63/2P | 147 | 137 | 120 | 125 | 125 | Φ6 |
| CJQ1-63/3P | 185 | 137 | 120 | 165 | 122 | Φ6 |
| CJQ1-63/4P | 220 | 137 | 120 | 194 | 125 | Φ6 |
CEJIA has over 20 years of experience in this industry and has built a reputation for providing quality products and services at competitive prices. We are proud to be one of the most reliable electrical equipment suppliers in China with more. We attach great importance to product quality control from raw materials procurement to finished product packaging. We provide our customers with solutions that meet their needs on a local level, while also giving them access to the latest technology and services available.
We are able to produce large volumes of electrical parts and equipment at very competitive prices in our state-of-the-art manufacturing facility located in China.
Q1:Are you a trading company or manufacturer?
A.We are professional manufacturer for low-voltage circuit breaker series products,Integrates research and development, manufacturing, processing and trade departments together. also we supply of different electrical and electronic items
Q2: why will you choice us :
A.more than 20years of professional teams will give you good quality products ,good service ,and reasonable price
Q3: Is the MOQ fixed?
A.The MOQ is flexible and we accept small order as trial order.
....
Dear Customers,
If you have any question , please feel free to contact with me , I will send you our catalog for your reference.
){kind=link}