| Customization: | Available |
|---|---|
| Type: | Distribution Metering Box |
| Structure: | Protection |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CJMCU consumer unit distribution board
1.A metal consumer unit is a particular type of distribution board .
2.lt controls and distributes electrical energy, especially in domestic premises.
3.Modern consumer units have ground leakage trips rather than fuses as protection.
4.A consumer unit normally has a single horizontal row of miniature circuit breakers.
5.The loading current rating is 100 Amps, up to the demanding requirement of the largest home requiring.
Features
1. Standard: BS/EN61439-3.
2.Operating Voltage: 230V,50/60Hz.
3. Protection Degree: lP20.
4. Maximum Load(A): As indicated on the incoming device.
5. Material manufactured from cold rolled steel sheet.
6. Fully enclosed metal construction body with drop-down metal lid.
7. Multiple circular cable entry knock-outs ( 25&32mm) on the top and bottom,40mm on the sides and back, plus larger rear slots.
8. A strong magnet used in the lid closed with a unique design.
9. Raised Din rail improves cable routing.
10. Modern style finished in white polyester powder coating to RAL9003"Large and accessible wiring space, with extra space for RCBOs.
11. Flexible connection allows for various configurations of protected ways.
| Rated and Operational Voltage (Un/Ue) | 230V |
| Rated impulse Withstand Voltage (Uimp) | 4kV |
| Rated Current of Assembly (InA) | 100A,63A,40A |
| Rated Frequency (fn) | 50/60 Hz |
| Degree of Protection | IP20 |
| Mechanical Impact Protection | IK05 |
| Note: Rated diversity factor (RDF) only applies to continuously and simultaneously loaded circuits. | |
| Wiring Type | Functional Features |
| Main Switch Consumer Unit | Provides the highest degree of circuit separation, as all circuits must be independently protected against leakage. |
| Dual RCD Consumer Unit | Provides a cost-efficient solution in compliance with the regulations by using two RCDS to protect two sets of circuits from ground leakage. |
| High Integrity Consumer Unit | Typically used in larger properties with a greater number of circuits, this type of consumer unit provides good circuit separation by using two or more RCDS while allowing independent use of the RCBO. Typically, this type of consumer unit also allows for a fully flexible configuration, meaning that there is no limit to the number of RCBOs used. |
| RCD Consumer Unit. | Less common than other types, RCD inputs do not use a master switch. They are usually used as sub-boards of the main switchboard. |
| Product Number | Description | Usable Ways | Outline Dimensions | ||
| Width(mm) | High (mm) | Depth(mm) | |||
| CJME2/S | 2 Module with din rail only | 2ways | 87 | 154 | 108 |
| CJME4/S | 4 Module with din rail only | 4ways | 123 | 184 | 108 |
| CJME2 | 2 Module with din rail only | 2ways | 87 | 243 | 108 |
| CJME4 | 4 Module with din rail only | 4ways | 123 | 243 | 108 |
| CJMFS100 | 100A Metal Fused Switch | 4ways | 123 | 243 | 115 |
| CJMCU4 | 4 Module Metal Consumer Unit | 4ways | 123 | 243 | 108 |
| CJMCU5 | 5 Module Metal Consumer Unit | 5ways | 141 | 243 | 108 |
| CJMCU6 | 6 Module Metal Consumer Unit | 6ways | 158 | 243 | 108 |
| CJMCU8 | 8 Module Metal Consumer Unit | 8ways | 208 | 243 | 108 |
| CJMCU10 | 10 Module Metal Consumer Unit | 10ways | 243 | 243 | 108 |
| CJMCU14 | 14 Module Metal Consumer Unit | 14ways | 315 | 243 | 108 |
| CJMCU18 | 18 Module Metal Consumer Unit | 18ways | 394 | 243 | 108 |
| CJMCU22 | 22 Module Metal Consumer Unit | 22ways | 467 | 243 | 108 |
){kind=link}