| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Brand: | C&J |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is dual power automatic transfer switch?
Dual-power automatic transfer switch is microprocessor, which is used to start and switch between grid power and grid power or between grid power and generator power supply in power grid system. It can supply power continuously. Series of dual power supply, when the common use of sudden failure or power outage, through the dual power automatic transfer switch, automatically put into the standby power supply (under small load standby power supply can also be supplied by generators), so that the equipment can still operate normally. The most common are elevators, fire protection, monitoring, lighting and so on.When the generator set is used as emergency lighting power supply, the start-up time and power conversion time of the generator should not exceed 15s. Double power automatic switching switch should choose "city power - generator conversion" special type.
Dual-power automatic transfer switch has the functions of short circuit and overload protection, over-voltage, under-voltage, phase-gap automatic conversion and intelligent alarm, automatic conversion parameters can be set freely outside, and intelligent protection of operating motor. When the fire control center gives a control signal to the intelligent controller, two circuit breakers enter the sub-unit. In the gate state, the computer network interface is reserved for the realization of remote control, remote adjustment, remote communication, remote measurement and other four remote functions.
Application
1.CJQ3 series Automatic transfer switch mainly used for distribution or electromotor network, which under voltage 400V, rated voltage DC 220V, Rated current 63A-3200A.
2.Main power and standby power or mutual standby power change over system or city power and generator group overload switch-over. At the same time, it can operated under un-frequency on and off circuit act as disconnector.Widely used at the field of important power supply site, which transport, distribution power supply system and automatization system. For fire protection,hospital,bank,building,etc, where doesn't allow power off.
| Name | Details | ||
| Enterprise code | Zhejiang C&J Electrical Holding Co., Ltd. | ||
| Product category | PC class automatic transfer switch | ||
| Design code | 3 | ||
| Current frame | Product code | Current frame | |
| GA | 100A,160A,250A,400A,630A,1000A,1250A,1600A,2000A,2500A,3200A | ||
| Product code | Product code | Working current | Features |
| GA1 | 16A~100A | General type | |
| GA | 16A~3200A | Integral type, 3 positions, with fire-fighting function | |
| Pole | 3P,4P | ||
| Rated current | 16A~3200A | ||
| Working mode | R=Self-input and self-recover | ||
| Additional function | F:Utility-Generator | ||
| Frame class | 100 | 250 | 1600 | 3200 | ||||||||||||||||||
| Agreed heating current lth(A) |
63 | 100 | 125-3200 | |||||||||||||||||||
| Rated current In(A) | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3200 | |
| Rated insulation voltage(Ui) |
690V | 800V | ||||||||||||||||||||
| Rated concussion withstand voltage(Uimp) |
8kV | |||||||||||||||||||||
| Rated working voltage (Ue) |
AC400V | |||||||||||||||||||||
| Rated working current (le) |
16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 250 | 400 | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3200 | |
| Using category | AC-33B | AC-33iB | ||||||||||||||||||||
| Rated short-circuit connection capacity |
8kA | 26kA | 67kA | |||||||||||||||||||
| Rated short-time withstand current(lcw) |
5kA/30ms | 12.6kA/60ms | 32kA/60ms | |||||||||||||||||||
| Transfer time I-ll or II-I | 2.5s | 0.6s | 1.2s | 1.8s | 2.4s | |||||||||||||||||
| Control voltage | DC24V/48V/110V/AC220V | |||||||||||||||||||||
| Rated frequency |
Start(W) | 20 | 325 | 355 | 400 | 440 | 600 | |||||||||||||||
| Normal(W) | 62 | 74 | 90 | 98 | 120 | |||||||||||||||||
| Weight(kg) 4Pole | 3.4 | 6 | 7.6 | 15.8 | 16.8 | 36 | 36 | 37 | 38.6 | 55 | 61 | 67 | ||||||||||
CEJIA has over 20 years of experience in this industry and has built a reputation for providing quality products and services at competitive prices. We are proud to be one of the most reliable electrical equipment suppliers in China with more. We attach great importance to product quality control from raw materials procurement to finished product packaging. We provide our customers with solutions that meet their needs on a local level, while also giving them access to the latest technology and services available.
We are able to produce large volumes of electrical parts and equipment at very competitive prices in our state-of-the-art manufacturing facility located in China.
Q1:Are you a trading company or manufacturer?
A.We are professional manufacturer for low-voltage circuit breaker series products,Integrates research and development, manufacturing, processing and trade departments together. also we supply of different electrical and electronic items
Q2: why will you choice us :
A.more than 20years of professional teams will give you good quality products ,good service ,and reasonable price
Q3: Is the MOQ fixed?
A.The MOQ is flexible and we accept small order as trial order.
....
Dear Customers,
If you have any question , please feel free to contact with me , I will send you our catalog for your reference.
){kind=link}