| Breaking Capacity: | Low Voltage Circuit Breakers |
|---|---|
| Operation: | Electric Type |
| Speed: | Normal Type Circuit Breaker |
| Arc-extinguishing Medium: | Vacuum |
| Installation: | Fixed |
| Structure: | MCB |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier CJD1-125 series isolating switch is suitable in the resistive circuit of AC 50/60HZ, rated voltage 230/400V, rated current up to 125A. It's used primarily for circuit's turning on or off in non-load ed situation. And it functions on connection and isolation between lines and power, especially suitable to isolate power effectively and prevent circuit breaker from closing accidentally when maintain the circuit in order to ensure the safe operation of maintainer.
Product standard: IEC60947-3
1.Ambient Temperature: -25ºC~+60ºC
2.Altitude: Not higher than 2000m
3.Use Category: AC-22A
4.Installation Method: Embedded vertical standard rail mounting
5.Wiring Method: Clamp connection wire with screw, tightening torque 2.5N.m
1.Capable of switch electric circuit with load
2.Adaptable to padlock device
3.Contact position indication
4.Capable of quickly releasing stored energy operation
5.Highlighted of high making and breaking capacity
6.High short-circuit current withstand capacity
7.Used as main switch for household and similar installation
| Standards | IEC/EN60947-3 |
| Pole No | 1P, 2P, 3P, 4P |
| Rated voltage | AC 230V/400V |
| Rated Current(A) | 63A, 80A, 100A,125A |
| Rated frequency | 50/60Hz |
| Rated short-circuit making capacity | 6kA |
| Rated short-time withstand current | 2kA within 1sec |
| Electro-mechanical endurance | 10000 cycles |
| Connection capacity | Rigid conductor 35mm² |
| Connection terminal | Screw terminal |
| Pillar terminal with clamp | |
| lnstallation | On symmetrical din rail 50mm |
| Panel mounting | |
| Terminal Connection Height | H=19mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}